Quick Fist Original tool holder
The tool holders are ideal for objects with a diameter of 25 - 50 mm.
Each bracket has a reliable load capacity of 11 kg, when used in the set the load capacity is 22 kg.
The tool holders are easy to assemble and the mounting surface of the holder is 64 x 19 mm.
The plastic was tested in accordance with AfPS GS 2015:01 PAH and is suitable for long-term skin contact.
Contents: 2 pieces
Assembly
- Use a #10 bolt or screw to attach. Don't overtighten.
- The Quick Fist tool holder can be mounted in any direction.
- To clamp, simply clamp the tool between the clamping jaws.
Then press the strap with both thumbs and tighten it accordingly.
- When using e.g. B. on roof racks with round tube frames, the tool holder can be mounted using hose clamps. Make sure the hose clamp is on the plastic washer to avoid damaging the rubber tool holder.
- Do not use for exhaust pipes.
Notice
New Quick Fist tool holders can be a little stiff. Pull the open clamping jaws once or twice and fix and loosen several times before assembly.
