Bergetools - Your shop for 4x4 off-road accessories - suitable for your vehicle and your projects


Your Cart is Empty

TireJect Automotive 6OZ - 177.4ml - Refill Pack

Inkl. MwSt. zzgl. Versand
Lieferzeit: 3-5 Tage

TireJect Automotive - 6OZ-Refill - refill pack

  • NO inner valve extractor, NO filling aid, ONLY refill pack
  • 1 x 6oz Bag of TireJect Automotive Tire Sealant - Dupont™ Kevlar® Fibers in Liquid Adhesive.
  • 6OZ - 177 ml sufficient for a tire up to size 245/65-18

Seals creeping flat feet and holes up to 6 mm in tires up to 245/65-18 size


      • The affected wheel's valve should be down
      • Shake the bag of liquid sealant very well
      • Remove the inner valve of the flat tire using the kit's tools
      • Shake the bag again, open it and screw on the kit's filling aid (90° = closed, 180° = opened)
      • Put the hose on the valve
      • Open the dosing aid (hose - bag 180°) and fill in sealant
      • Screw in the inner valve
      • Inflate tires to desired pressure
      • Drive for about 5 minutes so that the sealant can spread well everywhere

      My opinion

      I was skeptical about the tire sealant at first, but the first tests are great! After several days of losing an average of 1 bar of pressure on a tire within 24 hours (315/70-17) and not being able to find any leaks without dismantling the wheel, I put (8OZ) 236 ml of the sealant in the tire Filled it up, pumped it back up to 2.5 bar and did a few laps. After 24 hours 2.45 bar, after 48 hours 2.45 bar :)

      That was in July 2021! Meanwhile, February 2022, a few thousand kilometers later, the tire is still holding air, despite many off-road kilometers and frequent depressurization and re-inflation. I am convinced!

      Tip: Shake very well several times before filling, otherwise the aramid fibers will clump and can clog the filling aid.